Copyright © 2018 by "Musical Instrument Repairs WA (MIRWA)" · All Rights reserved · E-Mail: service@mirwa.com.au
Scuff sand again with 320 grit
Having now done 2 coats sealer, 3 coats clear, we now wet sand the surface with 1000 grit wet and dry.
Finally onto the buffer, medium buff and then fine buff.
One smooth shiny neck, less than 2 hrs from start to finish.
Top view.
Re-assemble all the hardware
Refit the neck to the body
Refit the neck to the body
Ready for a setup and strings
Headplate up close.
Scuff sand that coat with 320 grit sandpaper
Paint it again, cure it off with the light
Paint coat 2
Paint coat 2
Paint and cure it off again
Paint coat 3
Paint coat 3
Cure the first coat of paint, 6-9 passes
Setup and strings, job finished.
