Copyright © 2018 by "Musical Instrument Repairs WA (MIRWA)" · All Rights reserved · E-Mail: service@mirwa.com.au
The failed glue.
Once all dry, we clean old glue and residue from the joint.
The neck is going straight back on using titebond.
Hi-tech spatula device
Push the joints back together.
Seat the tenon down using a small clamp
Then insert the bolt inside to tighten the heel against the body.
Remove and release the clamp to make sure its seated nicely inside
And rear.
Once the glued extension has been released, this neck comes straight out due to the tenon glue failure.
This guitar also is having some binding repairs carried out as well.
Now two fresh clamps at the start of the extension area.
Working the glue on the opposite side.
Two more in through the soundhole
Clean up all glue residue.
