Copyright © 2017 by "Musical Instrument Repairs WA (MIRWA)" · All Rights reserved · E-Mail: service@mirwa.com.au
Using a soldering iron again, we reconnect the wires back to the pots that we cut them from.
Use the outer pickup screws to wind the pickup to a desired height under the strings..
Tune again, and all finished
Refit the pickup and slide the wiring down into the rear cavity.
Repeat for the other pickup.
Close it all up and fit a set of strings.
Lighty solder the sides to the original solder, this locks the pickup back in place.
