Copyright © 2017 "Musical Instrument Repairs WA (MIRWA)" · All Rights reserved · E-Mail: service@mirwa.com.au
Fit the nut with a couple of drops of superglue, same process as applying a bone nut.
Clean the body
Oil the fingerboard
Finished
Oil the fingerboard
Finished
After 6hrs dry time, we remove all clamps
Allow to dry for an hr.
Fit and shape the bridge or replace as required
Attached link shows process of making a new Bridge
Attached link shows process of making a new Bridge
Using an oil dye, we stain the fingerboard for eveness of colour
Time to glue the board on, using hide glue and flexible clamps
Because hide glue sets so fast its impossible to photo the process of actually applying the glue, attached is a link to the types of glues we use in lutherie and how we apply them.
Page not developed yet