Copyright © 2018 by "Musical Instrument Repairs WA (MIRWA)" · All Rights reserved · E-Mail: service@mirwa.com.au
Check against the mold, perfecto.
Align and check
Top and bottom.
The trick with lutherie, is repeat, do not waste any wood, so I cut another two blocks out of the scrap piece of mahogany, I will mark and put these away for another build.
I label all blocks with the mold No.
The two guitar sides can now be brought together with the tail block.
Repeat both sides.
To glue it up, simply titebond glue onto the tail block
Plenty of clamps, allow to dry for 24hrs
After 24hrs, remove clamps. Tail block made and fitted.
Move on to the next step of guitar building which is rough levelling the sides to the top and back contours
Next raw part that needs to be made is Kerfing
Move on to the next step of guitar building which is rough levelling the sides to the top and back contours
Next raw part that needs to be made is Kerfing
