Copyright © 2018 by "Musical Instrument Repairs WA (MIRWA)" · All Rights reserved · E-Mail: service@mirwa.com.au
Finished slot
Refit the bridge as per tutorial
After 24hrs remove clamps.
Countersink the pin holes
Using a 3 degree hand reamer we ream to fit each pin.
Test fit as per so.
Refit electronics.
Refit Saddle
Shape the top to approximate original profile
With an overhead router we connect the two drilled holes for our saddle
Test fit the saddle, tweak as required.
Remove saddle and smooth sand the bridge
Repeat for the opposite side.
Fresh oil
Allow 15 minutes to dry
Restring and set the guitar up.
Job done
Job done
